Adhesives and Sealants

Green purchasing guidance for adhesives and sealants, including:

  • Construction
  • Carpets
  • Flooring
  • Auto glass

Required specifications

The following have been identified as green specifications relevant to the good/services as minimum mandatory requirements. These would not be part of a scored exhibit. If you are using the Washington state procurement manual templates, the following should be inserted in the relevant document that describes the product or performance requirements.

Use the table in (d)(1) on page 14-16 of the South Coast Air Quality Management District (SCAQMD) Rule 1168 as the product requirements. Use the products that are applicable to the solicitation/purchase along with the link.

For Example: Products must contain VOC at or below the indicated limits as described in South Coast Air Quality Management District (SCAQMD) Rule 1168. For this contract the following are most likely to be utilized.

Category VOC Limits (g/L)
Carpet Pad Adhesive 50
Ceramic Glass, Porcelain, & Stone Tile Adhesive 65
Subfloor Adhesive 50
Wood Flooring Adhesive 20
All Other Indoor Floor Covering Adhesives 50

Prohibited products/product specifications

Preferred specifications

The following have been identified as green specifications relevant to the goods/services as preferred specifications to be scored. These would be part of your evaluation. If you are using the Washington state procurement manual templates, the following should be inserted in the relevant document that is used for evaluation.

Laws, rules, and executive orders

These laws, rules, and executive orders are the basis for these specifications: